Accessories

A complete set of interchangeable inserts icon for Keypad series and Open Keypad series.

The Memory Module is a small SD Card holder that can be connected via CAN bus to your AiM logger in order to record the data during your tests: the data will be saved simultaneously both in the logger and on the SD Card (not included).

Dedicated GPS with cable and bracket for MXK10 plug&play display dash logger for Kawasaki Ninja ZX-10 R.
Cable length 50 cm.

Infrared Optical Receiver for MX 1.3 Strada Series.

The Infrared Optical Reciever also known as IR Optical Lap Receiver, is mounted on your vehicle to detect lap signals from an infrared transmitter located at the side of the track.
For accurate signal detection, simply aim the receiver toward the transmitter's position.

It is available with a 4-pin plastic binder connector.

Two cable lengths are offered to suit different vehicle types: a 90 cm lead for motorcycles, motocross bikes, or karts, and a 300 cm lead for cars.

Display for EVO Series (EVO6, EVO6L, EVO4S and EVO5), resolution 268 x 128 pixels, 7 configurable RGB colors backlights, ambient light sensor, 5 configurable RGB LEDs shift lights, 4 configurable, RGB LEDs alarms, fully configurable pages, aluminum body, IP65.

In the box:
GS-Dash with coiled cable.

USB cable for: MyChron5S/2T and MX Series.

Type C - Type A USB harness

Display glass replacement kit: for SmartyCam 3 Corsa

Replacement Instructions

Lens glass replacement kit for: SmartyCam 3 Corsa

Replacement Instructions

With the optional RACING KIT, composed by 4 analogic channels + K-Line harness and K-Line extension cable, the MXPS dash logger turns into a complete system with every feature you may need on track: basically you can read 28 extra channels coming from the ECU and connect up to 4 sensors for a precise setup regulation. Now you have total control of your GSX-R 1000, with the potential to drastically improve your performance.

EXTRA CHANNEL LIST

The Racing Kit is composed by:

1. 4 analogic channels +K-Line harness

2. K-Line extension cable

Turn your dash/logger into a rearview mirror.

The last generation of AiM MX series (1.2 and 1.3) and PDM32 Power Distribution Module are now able to manage up to two rear cameras which show the driver what happens behind him both when he’s driving and while he’s parking the car.

PDM Display available in three sizes: 5", 6", and 10", designed to display all the data logged by the PDMs.

Bullet Camera for SmartyCam3 Dual/GP

Lens glass replacement kit: for SmartyCam 3 Sport

Replacement Instructions

Adapter for SW4 270 (MY26).

Compatible with:

Krontec
Lifeline