Required component for Taipan B installation on Beta stock version.
The Beta OEM Idle Motor is not compatible with our Taipan B ECU.
To ensure proper operation, we provide a dedicated AirPlug.
If the original throttle body is replaced with a non-Beta throttle body (e.g. KTM, Honda) the Air Plug is not required.

Bracket kit replacement for Kart accelerator/brake pedal magnetic position sensor.

The Shift Light Module is a compact array of ten RGB LEDs which helps monitoring RPM thresholds and lap time performances. It can be helpful when you have a logger but not a dash, or even in case your dash is positioned where you can't easily see its shift lights.

Karting Steering Wheel specifically designed for MyChron in anodized aluminum, chamois leather.
Available in two colors (red/black or black) and 3/6 holes versions.

In the box:
Steering wheel, bracket.
Installation guide freely downloadable from AiM web site.

Plug & Play Dash Logger kit specifically designed for Lotus Elise/Exige 2011-2019.
6" high contrast 1,100 lumen TFT display, 6 status information LEDs, 10 shift lights LEDs, 2 turn indicators, 2 CAN connections, 802.11 Wi-Fi connection, 4 GB internal memory, anodized aluminum body, 1 Delphi 12040722 connector + 4 Binder 712 connectors, IP65.

In the box:
MX2E dash logger with cluster, dedicated GPS, screws and washers.
User manual & RaceStudio 3 software freely downloadable from AiM web site.

Infrared Optical Lap Receiver for MyChron6/2T.

The Infrared Optical Lap Receiver also known as IR Optical Lap Receiver, is mounted on your kart to detect lap signals from an infrared transmitter located at the side of the track.
For accurate signal detection, simply aim the receiver toward the transmitter's position.

It features a metallic binder connector and 90 cm or 140 cm cable to suit different mounting.

Display for EVO Series (EVO6, EVO6L, EVO4S and EVO5), resolution 268 x 128 pixels, 7 configurable RGB colors backlights, ambient light sensor, 5 configurable RGB LEDs shift lights, 4 configurable, RGB LEDs alarms, fully configurable pages, aluminum body, IP65.

In the box:
GS-Dash with coiled cable.

The Memory Module is a small SD Card holder that can be connected via CAN bus to your AiM logger in order to record the data during your tests: the data will be saved simultaneously both in the logger and on the SD Card (not included).

Dedicated GPS with cable and bracket for MXK10 plug&play display dash logger for Kawasaki Ninja ZX-10 R.
Cable length 50 cm.