Filter By
Products
Discover AiM products for motorsport: lap timers, loggers, visors, steering wheels, motorsport cameras and all products properly designed and developed for your car, bike or kart.
Subcategories
-
![]()
Kit SmartyCam 3 Sport for MyChron
The compact SmartyCam 3 Sport camera has been designed for motorsport with a single purpose: providing great videos including all information you need.
SmartyCam 3 Sport camera overlays all the data from both GPS and AiM loggers connected to your ECU.Kit SmartyCam 3 Sport configuration:
- 84° Camera Lens
- 200 cm CAN Cable
- Data Hub 2-ways
-
![]()
SmartyCam 3 Sport
The compact SmartyCam 3 Sport camera has been designed for motorsport with a single purpose: providing great videos including all information you need.
SmartyCam 3 Sport camera overlays all the data from both GPS and AiM loggers connected to your ECU.
-
![]()
SmartyCam 3 GP
The SmartyCam 3 GP camera has been designed for motorsport with a single purpose:
PROVIDING GREAT VIDEOS INCLUDING ALL INFORMATION YOU NEED.
SmartyCam 3 GP camera overlays all the data from both GPS and AiM loggers connected to your ECU.
-
![]()
SmartyCam 3 Dual
IF ONE IS GREAT, DUAL IS BETTER
SmartyCam 3 Dual is the flagship version of SmartyCam 3 range, designed for any racer who wants to get the most out from any performance video on the track. Dual Full HD camera system, Video output, CAN connection, USB-C connection, Ethernet port are only few of the features of SmartyCam 3 Dual: the most powerful of our range.
-
![]()
SmartyCam 3 Corsa
The SmartyCam 3 CORSA camera has been designed for motorsport with a single purpose:
PROVIDING GREAT VIDEOS INCLUDING ALL INFORMATION YOU NEED.
SmartyCam 3 Corsa camera overlays all the data from both GPS and AiM loggers connected to your ECU.
-
![]()
Track-Day Kit
Solo 2 DL and SmartyCam 3 Corsa or Sport: The perfect combinaton between data and videos.
-
![]()
- New
MyChron6 2T
The ultimate lap timer for serious kart racers.
The MyChron6 2T is the benchmark for lap timers dedicated to the karting world. Designed for the most demanding karting teams and drivers, the The MyChron6 2T manages two temperature values acquired from exhaust gas, cylinder head or water temperature sensors.
-
![]()
- New
MyChron6
MyChron 6 is the new arrival in the prestigious MyChron range: The reference for laptimers dedicated to the world of karting.
MyChron 6 brings with it many new features.
It samples lap times and split times, speed, RPM, temperature, track position, accelerations and much more even more accurately, guaranteeing you an even more precise predictive time and reference lap delta.
-
![]()
Yarara
Yarara is the plug & play ECU developed by AiM for being installed on the Yamaha YFZ450R. Thanks to its high technology 32-bit core, it is a good help for improving the performances of your ATV, without sacrificing reliability and smoothness. Yarara is specifically designed for: Yamaha YFZ450R Model year 2021 and 2022.
Purchase the UC-Bridge to keep it update, receive remote assistance, make map corrections and check faults indications
-
![]()
Taipan Y v2
Taipan Y v2 is the brand-new aftermarket plug & play ECU created by AiM, exclusively designed for Yamaha offroad motorcycles. Thanks to their high technology 32-bit core, they represent an important step forward to improve the performances of your motorcycle, without sacrificing reliability and smoothness.
Purchase the UC-Bridge to keep it update, receive remote assistance, make map corrections and check faults indications
-
![]()
Taipan K
Taipan K is the brand-new aftermarket plug & play ECU created by AiM, exclusively designed for 2 strokes off-road motorcycles. Thanks to their high technology 32-bit core, they represent an important step forward to improve the performances of your motorcycle, without sacrificing reliability and smoothness.
Available for 2 stokes engines KTM, Husqvarna and Gas Gas.
-
![]()
Taipan
Taipan is the brand-new aftermarket plug & play ECU created by AiM, exclusively designed for off-road motorcycles. Thanks to their high technology 32-bit core, they represent an important step forward to improve the performances of your motorcycle, without sacrificing reliability and smoothness.
-
![]()
Taipan Y
Taipan Y is the brand-new aftermarket plug & play ECU created by AiM, exclusively designed for Yamaha offroad motorcycles. Thanks to their high technology 32-bit core, they represent an important step forward to improve the performances of your motorcycle, without sacrificing reliability and smoothness.
Purchase the UC-Bridge to keep it update, receive remote assistance, make map corrections and check faults indications
-
![]()
Solo 2 DL
Solo 2 DL in addition to what Solo 2 offers, provides some extremely useful features:
ECU connection for receiving, showing and recording all the data directly from your ECU, both for CAN, RS232 and K-line connections, low voltage 150-400 V of the coil or from a digital square wave signal (8-50 V) and CAN expansions
-
![]()
GPS09c Open
GPS09c Open is a stand-alone device that can stream, in completely configurable messages, all the GPS data at 25 Hz via CAN or RS232.
The Pro Open version features also a 100 Hz 6 axis IMU.
Vehicle with carbon fiber roof or reduced glass surface may limit the GPS signal: the Roof version of AiM GPS09c Open is specifically designed to mount on roof of the vehicle. -
![]()
GPS09c
Accessory for: SmartyCam 3 and other products. GPS09c with integrated antenna and CAN cable. You can choose between standard version and Pro version (6 axis IMU). Available in Roof version too.
-
![]()
- New
MyChron Expansion
The channel multiplier for your MyChron
Compatible with MyChron6/2T and MyChron5S/2T -
![]()
- New
LCU1S Open
LCU1S Open is a stand-alone device that allows to perfectly tune the carburetion of your engine to keeping it at its best and improve the engine's performances. lt uses a wide band Bosch LSU 4.9 sensor that saves the original calibration for the duration of the sensor's life. In fact, Bosch LSU 4.9 probe has been designed to last for more than 100,000 km on a stock car.
-
![]()
- New
LCU1S
LCU1S controller allows to perfectly tune the carburetion of your engine to keeping it at its best and improve the engine's performances. lt uses a wide band Bosch LSU 4.9 sensor that saves the original calibration for the duration of the sensor's life. In fact, Bosch LSU 4.9 probe has been designed to last for more than 100,000 km on a stock car.
-
![]()
- New
ACC3 Open
ACC3 Open is the compact Analog CAN Converter by AiM
The device manages 4 analog inputs to a max frequency of 200 Hz each and thanks to the dedicated split harness, the managed inputs are: thermocouples, thermoresistances, 0-5 V Signal, 0-12 V Signal, 0-12 V Signal, 2 Digital speed inputs
ACC3 Open is freely configurable through "Open USB harness", using the AiM software RaceStudio 3.
NOTICE - "Open USB harness" sold separately. -
![]()
- New
ACC3
ACC3 is the compact Analog CAN Converter to expand your AiM system.
ACC3 Expansion manages 4 analog inputs to a max frequency of 200 Hz each and thanks to the dedicated split harness, the managed inputs are: thermocouples, thermoresistances, 0-5 V Signal, 0-12 V Signal, 2 digital speed inputs
-
![]()
M10 water temperature thermoresistor
AiM devices can measure and sample water temperature using a sensor (thermo resistor) placed in the cooling system.
-
![]()
M10 water temperature thermocouple
AiM devices can measure the water temperature using a sensor – thermocouple – placed in the cooling system. All AiM thermocouples are K type sensor.
-
![]()
GT32 Standalone
GT32 Standalone steering wheel transmits in a freely configurable CAN connection the status of 8 pushbuttons and 3 rotary switches plus more 2 pushbuttons in free contacts connections.
GT32 Standalone can be connected via CAN to every ECU and masters.
It features also 2 carbon fiber paddle shifters with a precise magnetic system.
The Steering wheel can be easily configured with RaceStudio 3 software via PC through USB 2.0 A-Type C-Type 200 cm cable included.
Icons set included:
-
![]()
GT32
GT32 steering wheel is a dedicated expansion for PDM32/PM08 and transmits in a freely configurable CAN connection the status of 8 pushbuttons and 3 rotary switches plus more 2 pushbuttons in free contacts connections.
It features also 2 carbon fiber optional paddle shifters with a precise magnetic system.
Icons set included:
-
CHT - Cylinder Head Thermocouple Binder
AiM devices can measure cylinder head temperature using a sensor – thermocouple – located between the spark plug and the cylinder head. This thermocouple is available with
different diameters with a binder 3 pins connector with a 40 cm cable length.
-
CHT - Cylinder Head Thermocouple Mignon
AiM devices can measure cylinder head temperature using a sensor – thermocouple – located between the spark plug and the cylinder head. This thermocouple is available with
different diameters and a mignon connector with a 40 cm cable length.
-
![]()
K8 Open Keypad
K8 Open is a compact keypad based on CAN-bus protocol.
It can be connected through CAN to every external device.
The keypad is water and dust resistant, and can be installed both inside and outside the cockpit.
K8 Open Keypad is freely configurable through USB, using the AiM software RaceStudio 3.
