Filter By
New products
New products
Accessories
Here you find all accessories properly designed and developed to install AiM products, increase its capacity and improve your performances on the track.
Active filters
- Categories: Cables and harnesses
-
![]()
Split Harness
€70.00Split Harness for ACC3, ACC3 Open, ACC2 and ACC2 Open.
With ACC3 and ACC3 Open customers can choose, according to their needs, among 5 different split harnesses. Up to 4 thermocouples or 4 analog channels 0÷5 V/0÷12 V are available.
-
![]()
-
Motorsport Connector 22 pins + contacts for SmartyCam 3 Dual
€110.00Motorsport Connector 22 pins + contacts for: SmartyCam 3 Dual
-
Track-Day Kit dedicated cable
€46.00Dedicated cables for Track-Day Kit, the perfect accessory for Solo 2 DL and SmartyCam 3 Corsa or Sport.
-
![]()
Bullet Cam Cable for SmartyCam 3 Dual/GP
€90.00Dedicated cable for SmartyCam 3 bullet cams, various length.
2 SMA Male connectors.
-
CAN Open Harness - no power
€46.00Open Harness connection cables for Open products without power 7M712-FW
-
CAN AiM Harness 5M5F712
€46.00CAN AiM Harness 5 Pins Binder 712 male- 5 Pins 712 female, various measure
Dedicated to: GT32
-
![]()
CAN Open Harness for Open products
€46.00Open Harness connection cables for Open products, sizes from 50 cm to 400 cm.
-
RS232 Open Harness for GPS09c Open
€40.00RS232 Open Harness connection cables for GPS09c Open, various lenght.
-
CAN AiM Harness for Open products
€46.00CAN AiM Harness connection cables to connect Open system to AiM devices,various lenght.
-
- New
2 pins power cable
€50.00Power cable for EVO4s, MyChron Expansion and Tire temperature sensor kit.
2 pins binder connector, 2 faston male-female cable length 120 cm.
-
USB configuration harness 50 cm + 12V Power
€70.00USB Harness 50 cm + 12V Power dedicated to Open selected devices such as K8Keypad and ACC2.
-
![]()
CAN AiM Harness
€46.00CAN AiM Harness 5 Pins Binder 712 male, various measure
Dedicated to: K8, ACC2, SmartyCam 3 GP and CORSA
-
![]()
-
![]()
MyChron6 sensor patch cable
€46.00The patch cable designed for MyChron6 allow the connections of different sensors.
It is available in two versions for using with thermocouples and thermoresistors.
Cable length is 150 cm, may vary depending on the connector.
-
![]()
MyChron6 2T sensor split patch cable
€58.00The split patch cable designed for MyChron6 2T grant the use of two different sensor simultaneously.
It is available in three versions for using with thermocouples, thermoresistors or both.
Cable length is 150 cm, may vary depending on the connector.
-
-
-
-
-
![]()
Yamaha YZ dedicated cable for Solo 2 DL-ECULog-XLog
€69.00Dedicated connection cable for Yamaha YZ models.
-
![]()
TM Racing MX Bikes dedicated cable for Solo 2 DL-XLog-ECULog
€69.00Dedicated connection cable for TM Racing models.
Solo 2 DL/XLog sold separately. -
Mv Agusta Sports bike dedicated cable
€80.00Dedicated cable for MV Agusta sports bike model compatibile with: Solo 2 DL, ECULog and EVO4S for connecting the datalogger AiM to your motorbike ECU.
The best and easy way to get all the data you need from your bike.
-
![]()
Honda CRF dedicated cable for Solo 2 DL-XLog-ECULog
€69.00Dedicated connection cable for Honda CRF models.
-
-
-
-
![]()
Solo 2 DL/XLog/ECULog - AiM Taipan ECUs Connection cable
€50.00AiM designed specific applications to allow easy installation and connection of Solo 2 DL and XLog on motocross bikes. AiM Taipan ECU can be connected to Solo 2 DL/XLog using this dedicated connection cable for a complete AiM Motocross system.
-
Suzuki RMZ dedicated cable for Solo 2 DL-XLog
€71.00Solo 2 DL/XLog dedicated connection cable for Suzuki RMZ models.
-
![]()
KTM MX Bikes dedicated cable for Solo 2 DL-XLog-ECULog
€69.00Dedicated connection cable for models KTM SX/XC.
-
![]()
ECU Yarara secondary harness
€50.00Fulfill your needs with Yarara secondary harness.
The secondary harness is an useful add-on to express the full potential of Yarara. If you would like to connect a logger, the HBS handlebar switch, a quick shifter or use the dedicated Spark software, you need the secondary harness.
-
![]()
CAN2 Harness for MyChron6/6 2T
€64.00CAN2 harness for MyChron6/6 2T.
7 pins metallic binder, available with lap connector, lenght 150cm.
-
- New
Lap cable for MyChron6/6 2T
€48.007 pins metallic binder lap cable dedicated to MyChron6/6 2T, lenght 30 cm.
-
Extension Cable for sensors type 2
€46.00The AiM sensors are sold with a 30 cm cable. Standard length extension cables are available from 50 cm to 400 cm.
Compatible with
- MXG/MXP/MXS
- MXG Strada/MXP Strada/MXS Strada
- MXm
- EVO5
- MXL Strada/Pista/Pro05
-
Extension Cable for sensors type 1
€46.00The AiM sensors are sold with a 30 cm cable. Standard length extension cables are available from 50 cm to 400 cm.
Compatible with
- EVO4
- EVO4s
- Channel Expansion
- MyChron Expansion
-
-
Data Hub 2 ways for SmartyCam 3 and other products
€80.00Accessory for: SmartyCam 3 and other products.
The acquisition of all essential data you need to evaluate your car performance needs the connection of many peripherals to your datalogger. This implies the presence of a great number of cables. To solve this problem, AiM developed Data Hub, the CAN connection multiplier that works as an interface between all AiM loggers and their peripheral equipments.
-
-
![]()
