Products

K15 keypad is a compact keypad dedicated to AiM PDM32/PDM08 working through the AiM Expansion CAN Bus. The keypad is water and dust resistant, and can be installed both inside and outside the cockpit.

More Info

List of insert icons

K15 Open keypad is the compact keypad that allows the transmission of commands to any external instrument connected via CAN-bus by means of a free and easily configurable protocol.
The configuration is easily done via USB using the AIM Race Studio 3 software.
The keypad is resistant to dust and water and each button is customizable thanks to a wide choice of easily insertable icons.

More Info

List of insert icons

K6 Open is the compact keypad that allows the transmission of commands to any external instrument connected via CAN-bus by means of a free and easily configurable protocol.
The configuration is easily done via USB using the AIM Race Studio 3 software.
The keypad is resistant to dust and water and each button is customizable thanks to a wide choice of easily insertable icons.

More Info

List of insert icons

K6 Open Keypad features:

Reconfigurable button’s | RGB LEDs programmable | LED Backlit rings and icons | CAN-Bus systems compatible | Momentary, toggle and multi-status | 3 blinking mode | Wide range of inserts and icons | Vertical or horizontal mount | Status restore option

In the box:

K6 Open Keypad in the chosen version, CAN harness from 200 to 400 cm

K6 keypad is a compact keypad dedicated to AiM PDM32/PDM08 working through the AiM Expansion CAN Bus. The keypad is water and dust resistant, and can be installed both inside and outside the cockpit.

More Info

List of insert icons

ECULog is a data logger to record data from your ECU.

Rugged, waterproof with 4 GB internal memory, coming along with a 16 GB removable key and with its only 61 x 44 x 27 mm is the smallest data logger in AiM range.

More Info

K8 keypad is a compact keypad dedicated to AiM PDM32/PDM08 working through the AiM Expansion CAN Bus. The keypad is water and dust resistant, and can be installed both inside and outside the cockpit.

In the box: K8 Keypad and CAN Expansion harness from 200 to 400 cm

More Info

List of insert icons

K8 Open is the compact keypad that allows the transmission of commands to any external instrument connected via CAN-bus by means of a free and easily configurable protocol.
The configuration is easily done via USB using the AIM Race Studio 3 software.
The keypad is resistant to dust and water and each button is customizable thanks to a wide choice of easily insertable icons.

More Info

List of insert icons

K8 Open features:

Reconfigurable button’s | RGB LEDs programmable | LED Backlit rings and icons | CAN-Bus systems compatible | Momentary, toggle and multi-status | 3 blinking mode | Wide range of inserts and icons | Vertical or horizontal mount | Status restore option

In the box:

K8 Open Keypad in the chosen version, CAN harness from 200 to 400 cm

XLog is a complete and compact data logger for recording data from your ECU with integrated GPS and battery. Robust, waterproof with 4GB of internal memory, with the small removable 16GB USB drive, it's the most complete and compact data logger in the AiM range.

More Info

In the box: XLog 16 GB removable USB-C drive 200 cm cable (version-dependent): CAN/OBDII/K-Line/Ext. Power, CAN/RS232/Ext. Power, or RPM/Ext. Power The user manual and RaceStudio 3 software are free to download from the AiM website.

Key features:

ECU connection: CAN, RS232 or K-Line, external modules: GPS09c, LCU1S, SmartyCam 3 Series, analog inputs: 8 fully configurable: 0-5V, 0-12V, K thermocouples, max freq. 500 Hz each, digital inputs: Coil RPM and 4 speed inputs, inertial platform: internal 3 axis ±5G accelerometer + 3 axis gyro, 2 digital outputs (1 A each), second CAN, Wi-Fi connection, internal memory: 4 GB, internal SD card (up to 128 GB), 2 Motorsport connectors, body: anodized aluminum, 1 system status LED, waterproof IP65.

Key features:
ECU connection: CAN, RS232 or K-Line, external modules: GPS09c, LCU1S, SmartyCam 3 Series, analog inputs: 5 fully configurable, max 500 Hz each, digital inputs: 2 Speed inputs, lap signal, coil RPM input, inertial Platform: internal 3 axis ±5G accelerometer + 3 axis gyro, 1 digital output (1 Amp max), internal memory: 4 GB, connectors: 13 Binder 712 female connectors, body: anodized aluminum, 1 system status LED, Waterproof: IP65.