The Ultimate motorsport camera with bullet lens

THE CAMERA DESIGNED FOR FORMULA, PROTOTYPE, UTV AND MOTORCYCLES

Recording real-time overlay video with a low-distortion 67° or 84° lens and the CMOS Global Shutter sensor, SmartyCam 3 GP is designed to be the choice of those who want to take a step forward in data analysis in the world of Motorsport.

Play Video

Much more than an action cam

Thanks to the CAN ECU connection, the Start&Stop, the automatic on/off, and the video reversal for upside down mounting there will be no difficulty in configuring the system for your needs: once ready for your session on the track your AiM system will do everything you need without worries.
The day on the track can be intense, hectic and above all very long,  no problem: SC3 GP supports cards up to 2 TB (SD not included), you will have all the videos you want without having to give up any sessions.

AKM Motorpsort F4 open-wheel equipped with 84° bullet lens

Thanks to the CAN ECU connection, the Start&Stop and the automatic on/off, the 3G-SDI Output for streaming there will be no difficulty in configuring the system for your needs: once ready for your session on the track your AiM system will do everything you need without worries.
The day on the track can be intense, hectic and above all very long, no problem:  SC3 supports cards up to 2 TB (SD not included), you will have all the videos you want without having to give up any sessions.

SMARTYCAM 3 GP GRAPHIC OVERLAYS


REAL-TIME CONFIGURABLE OVERLAYS

SmartyCam 3 cameras have been designed for a single purpose:

PROVIDING GREAT VIDEOS
INCLUDING ALL INFORMATION YOU NEED FOR ANALYSIS

The camera overlays all the data from both GPS and AiM loggers connected to your ECU.

Previous
Next

RACESTUDIO 3 - THE POWERFUL SOFTWARE

SmartyCam 3 Configuration

With RaceStudio 3 software you can configure your overlays as you prefer: add your logo and the track map and choose your graphic elements from a list of pre-determined sets with same layout or even single objects from different sets. Your videos will be truly "yours" in all details, from the data to their graphic layout.

Play Video

VIDEO AND DATA ANALYSIS WITH RS ANALYSIS 3

The key to improvement in Motorsport

Data Analysis in Motorsport is based on 3 pillars and they form a formidable framework for enhancing your personal or team’s performance.

MAXIMIZING DRIVER PERFORMANCE
MONITORING VEHICLE STATUS
OPTIMISING EFFICIENCY

Thanks to the SmartyCam 3 cameras, all these important aspects could be under your control. The footage created by our cameras provide fantastic insights into telemetry and track lines in a professional motorsports setting. Keeping track of your car’s health is the first pillar of data analysis and with a SmartyCam 3 and AiM loggers you can visualize and manage alerts and essential data such as oil pressure and battery voltage for identify potential issue early, saving valuable time and efforts when faults.
Monitoring sensors and other parameters can help eliminate possible setup dead ends, guiding you to make more targeted adjustments.

Play Video

The video of a whole session, once downloaded on your PC, can now be split - with a simple click - in individual videos of each lap: so that you can simultaneously watch two of them and check where you were faster or slower. The same operation can be performed with a SmartyCam 3 video recorded on the same track: you will be able to compare your best lap with your friends personal best!

ADDITIONAL FEATURES

Video Output

SmartyCam 3 GP features a video output with SDI interface.
It allows to send the video/audio stream to a streamer at 30 or 60 fps to perform a video live streaming.

Full internal datalogger

All data received from the CAN bus and from the connected sensors are recorded in .mp4 files produced at the end of your test. Your SD (or MSD) Card contains all the information you need for a deep data analysis. The SD card can be also used for drive configuration, track and udate to the SmartyCam 3.
SD card sold separately.

Designed for the extreme

An on-board camera designed for motorsport must guarantee great resistance against the extreme working conditions typical of racing and against the most adverse weather.
That is why SmartyCam 3 Corsa is IP65 waterproof made in machinery molded aluminum, PA fiberglass reinforced and features sapphire frontal glass for a complete protection.

CAN connection

Connector labelled EXP is used to CAN connect the camera with AiM systems.
In the CAN network SmartyCam 3 GP can be a master or a slave and can be connected to different AiM devices. The second CAN is dedicated to ECU connection with more than 2,000 protocols supported, constantly updated. This connection can also be configured to communicate with other devices through RaceStudio 3 software.

RaceStudio 3

USB-C connection

USB-C port, placed in the side flap, makes any transfer from PC to SmartyCam 3 GP and viceversa easy and fast. Using the proper cable, USB-C port makes it possible to send configuration, updating, tracks and settings the camera framing in live view.

Automatic Start & Stop

You have other things to think about while you are racing and your SmartyCam 3 cameras is aware of that.
That is why it switches on/off automatically and starts/stops recording in the same way.

No "Jello Effect" with Global Shutter CMOS

Engine rumble causes vibrations, which are a big problem for video recording. You will never experience again that seasick “jello effect” you get watching videos recorded by a camera with rolling shutter when the vehicle is running. SmartyCam 3 cameras have been designed for that environment and for those vibrations. “Jello effect” is just a distant memory.

High quality with small size video files

Generic HD cameras are focused on the highest pixels number. The result is that their video files are far too large, taking too much memory; for this reason SmartyCam 3 videos have the same quality as other FHD cameras but their files are smaller because the H.264 compression system parameters have been optimized to perfectly balance video quality and file size.

Bullet cameras in motorsport are the best choice for single-seaters and cars with open cockpit, thanks to the video output, the connection for the external microphone, three lenses FOV angle available and the ECU connection SmartyCam 3 GP stands as the reference in the sector.

The Bullet Lens Field of View

Bullet cameras are the best option for open-wheels car, prototype and motorbike. 
SmartyCam 3 GP comes with 67°-84° or 120° angle lens.

The 67° lens is usually adopted in closed cars, thus avoiding an excessive view of the cockpit in the video, while the 84° and 120° lenses are used in open-wheel cars offering a wide open view of the track.

Exclusively designed for professional use

The top level SmartyCam 3 GP Pro features 2 AS Micro Xtra Lite Deutsch connectors and an internal EMMC 64 GB storage in addition to the SD Card slot. More powerful and faster than ever.
For inquiries please contact [email protected]

In the box:

SmartyCam 3 GP module with 67°, 84° or 120 bullet cam, 200 or 400 cm CAN Expansion/CAN ECU cable, 200 cm bullet cam cable, USB Type-C - Type-A cable, Battery charger with AC adapter.

ACCESSORIES

EXPANSION

TRACK-DAY KIT

The perfect combination between video and data.
Discover

DOCUMENTATION
Previous
Next

SmartyCam 3 GP

SKU XS3GPFHD067L200E Category Cameras

The SmartyCam 3 GP camera has been designed for motorsport with a single purpose:

PROVIDING GREAT VIDEOS INCLUDING ALL INFORMATION YOU NEED.

SmartyCam 3 GP camera overlays all the data from both GPS and AiM loggers connected to your ECU.

More Info

Battery charger
Bullet cam lens
Cable
  • Estimated delivery date:
  • Express
    Express - Buy today and receive it Monday 26 May, 2025

Related Products

Previous
Next