ACC3

The Compact Analog CAN Converters

ACC3 is available in two versions:


Connectable to	AiM devices	Other devices
Analog channels	4 fully configurable channels, 200 Hz each: TC, TR, 0÷5 V, 0÷12 V
Speed inputs	2 (AN3-AN4), max frequency 10 kHz, internal pull-up for open drain/collector input
External power	9÷15 V
Connection	1 Analog 8 pins Binder 712 + AiM CAN 5 pins Binder 712	1 Analog 8 pins Binder 712 + USB CAN 7 pins Binder 712
Material	PA6 30% glass
Dimensions	44.0 x 38.0 x 19.8 mm
Weight	50 g
Waterproof	IP65

ACC3 Analog CAN converters manage up to 4 analog inputs to a max frequency of 10 kHz each:

Thermocouples
Thermoresistances
0÷5 V
0÷12 V

Digital Speed Inputs

Both converters manage 2 speed inputs at a maximum frequency of 10 kHz.

SENSORS CONNECTIONS

Split Harnesses

They can manage many different sensors, from thermocouples to sensors whose output is 0÷12V.
Please, note that the thermocouples require dedicated compensated cables, so different kits and different harnesses are available.

CHANNEL CONFIGURATION

Once the proper split harness has been chosen between the available range, you can configure the channels according to the kind of sensor you connect to the converter. ACC3 series support up to four K type thermocouples to manage the temperatures.

ACC3 OPEN VERSION

EASY CONFIGURATION

Every OPEN device can be connected to a PC via a dedicated USB cable

CAN OUTPUT

ACC3 Open allows to build a CAN Output to communicate with external devices. You can set bit rate protocol, field messages and CAN payload details. The converter can also be used as an AiM Expansion, without any issues or limitations.

System Configuration example

SUSPENSION ANALYSIS

ACC3 and ACC3 Open can be connected to Eclipse sensors.
All the acquired data by AiM linear potentiometers can be managed through the new Suspension Analysis Tool in RaceStudio 3 , for an even more complete performance analysis software.