Products

K15 keypad is a compact keypad dedicated to AiM PDM32/PDM08 working through the AiM Expansion CAN Bus. The keypad is water and dust resistant, and can be installed both inside and outside the cockpit.

More Info

List of insert icons

K15 Open keypad is the compact keypad that allows the transmission of commands to any external instrument connected via CAN-bus by means of a free and easily configurable protocol.
The configuration is easily done via USB using the AIM Race Studio 3 software.
The keypad is resistant to dust and water and each button is customizable thanks to a wide choice of easily insertable icons.

More Info

List of insert icons

K6 Open is the compact keypad that allows the transmission of commands to any external instrument connected via CAN-bus by means of a free and easily configurable protocol.
The configuration is easily done via USB using the AIM Race Studio 3 software.
The keypad is resistant to dust and water and each button is customizable thanks to a wide choice of easily insertable icons.

More Info

List of insert icons

K6 Open Keypad features:

Reconfigurable button’s | RGB LEDs programmable | LED Backlit rings and icons | CAN-Bus systems compatible | Momentary, toggle and multi-status | 3 blinking mode | Wide range of inserts and icons | Vertical or horizontal mount | Status restore option

In the box:

K6 Open Keypad in the chosen version, CAN harness from 200 to 400 cm

K6 keypad is a compact keypad dedicated to AiM PDM32/PDM08 working through the AiM Expansion CAN Bus. The keypad is water and dust resistant, and can be installed both inside and outside the cockpit.

More Info

List of insert icons

GT32 Standalone steering wheel transmits in a freely configurable CAN connection the status of 8 pushbuttons and 3 rotary switches plus more 2 pushbuttons in free contacts connections.

GT32 Standalone can be connected via CAN to every ECU and masters.

It features also 2 optional carbon fiber paddle shifters.

The Steering wheel can be easily configured with RaceStudio 3 software via PC through USB 2.0 A-Type C-Type 200 cm cable included.

More Info

Icons set included:

Pushbuttons Icons

GT32 steering wheel is a dedicated expansion for PDM32/PM08 and transmits in a freely configurable CAN connection the status of 8 pushbuttons and 3 rotary switches plus more 2 pushbuttons in free contacts connections.

It features also 2 carbon fiber optional paddle shifters.

More Info

Icons set included:

Pushbuttons Icons

AiM devices can measure cylinder head temperature using a sensor – thermocouple – located between the spark plug and the cylinder head. This thermocouple is available with

different diameters with a binder 3 pins connector with a 40 cm cable length.

More Info

AiM devices can measure exhaust gas temperature using a sensor – thermocouple – placed in the exhaust header pipe. All AiM thermocouples are K type sensor and fit car/bike/kart installations.

The version with T12 connector is CIK-FIA homologated dedicated to karting.

M5

T12

ECULog is a data logger to record data from your ECU.

Rugged, waterproof with 4 GB internal memory, coming along with a 16 GB removable key and with its only 61 x 44 x 27 mm is the smallest data logger in AiM range.

More Info

AiM devices can measure cylinder head temperature using a sensor – thermocouple – located between the spark plug and the cylinder head. This thermocouple is available with

different diameters and a mignon connector with a 40 cm cable length.

More Info

K8 keypad is a compact keypad dedicated to AiM PDM32/PDM08 working through the AiM Expansion CAN Bus. The keypad is water and dust resistant, and can be installed both inside and outside the cockpit.

In the box: K8 Keypad and CAN Expansion harness from 200 to 400 cm

More Info

List of insert icons

K8 Open is the compact keypad that allows the transmission of commands to any external instrument connected via CAN-bus by means of a free and easily configurable protocol.
The configuration is easily done via USB using the AIM Race Studio 3 software.
The keypad is resistant to dust and water and each button is customizable thanks to a wide choice of easily insertable icons.

More Info

List of insert icons

K8 Open features:

Reconfigurable button’s | RGB LEDs programmable | LED Backlit rings and icons | CAN-Bus systems compatible | Momentary, toggle and multi-status | 3 blinking mode | Wide range of inserts and icons | Vertical or horizontal mount | Status restore option

In the box:

K8 Open Keypad in the chosen version, CAN harness from 200 to 400 cm

The patch cable designed for MyChron6 allow the connections of different sensors.

It is available in two versions for using with thermocouples and thermoresistors.

Cable length is 150 cm, may vary depending on the connector.

More Info

The split patch cable designed for MyChron6 2T grant the use of two different sensor simultaneously.

It is available in three versions for using with thermocouples, thermoresistors or both.

Cable length is 150 cm, may vary depending on the connector.

More Info

ECLIPSE, the new line of AiM potentiometers is born; thanks to our experience in the motorsport world this new series of sensors perfectly fits the needs of the car-bike racing industry. Easy to install, our linear position sensors offer great performances in terms of accuracy, repeatability and life expectancy.

AiM pressure sensors dedicated to kart/MyChron application: 0-160 or 0-100 bar with M10 or 3/8 thread.

Sensors ending with Binder 719 (plastic) male connector for AiM devices to be conencted to a MyChorn Expansion.

AiM designed and developed new sensors that can sample and record two measurement at one time: pressure and temperature and are available with different threads, ending with a 4 pins Binder 719 (plastic) male connector or free wires.

AiM devices can sample and record data supplied by different pressure sensors. Multiple pressure sensors types are in fact available in our product range both ending with a Binder 719 (plastic) male connector or free wires.

AiM devices can measure the distance between two points using a kart brake/accelerator pedal magnetic position sensor. It gives an extremely precise indication of the pedal position, measures its travel and shows all values in percentage in a 0 e 100%. range.

MyChron Expansion is mandatory to use these sensors, soon will be replaced by ACC3.

AiM instruments can measure the relative displacement between two different points using a sensor (rotary potentiometer) directly connected to the two measure points. This sensor may be used to measure angular displacements, such as throttle position. 

AiM loggers can measure an element rotation (i.e. steering angle) using the rotatory potentiometer kit whose items are to be mounted integral with the mobile element and with a fixed reference point on the vehicle chassis.
The potentiometer is sold with a specific installation kit.

AiM loggers can measure an element rotation (i.e. steering angle) using the rotatory potentiometer kit whose items are to be mounted integral with the mobile element and with a fixed reference point on the vehicle chassis.
The potentiometer is sold with a specific installation kit.

AiM devices can measure the water temperature using a sensor – thermocouple – placed in the cooling system. All AiM thermocouples are K type sensor.

More Info

AiM car bike devices can measure and sample water and oil temperature using a sensor (thermoresistor) placed in the cooling system or in the oil cup.

PLEASE NOTE - Not suitable for Karting application. For Kart is available the following sensor:

Kart thermoresistor

More Info

AiM devices can measure and sample water temperature using a sensor (thermo resistor) placed in the cooling system.

More Info

XLog is a complete and compact data logger for recording data from your ECU with integrated GPS and battery. Robust, waterproof with 4GB of internal memory, with the small removable 16GB USB drive, it's the most complete and compact data logger in the AiM range.

More Info