SmartyCam 3 GP
The SmartyCam 3 GP camera has been designed for motorsport with a single purpose:
PROVIDING GREAT VIDEOS INCLUDING ALL INFORMATION YOU NEED.
SmartyCam 3 GP camera overlays all the data from both GPS and AiM loggers connected to your ECU.
- Estimated delivery date:
-
UPS - United Parcel Service - Buy today and receive it Wednesday 18 December, 2024
The Ultimate motorsport camera with bullet lens
THE CAMERA DESIGNED FOR FORMULA, PROTOTYPE, UTV AND MOTORCYCLES
Auto Data & Video Sync
In case MP4 data are not enough for your analysis, simply import video file and data from your AiM Logger and the software will automatically synchronize them: position on the track, video frame and data on the graph will be perfectly correlated.
Video and Data Overlay
Your video with the most important data that you can choose to show with many graphic sets at your disposal, in the same MP4 file.
Full HD footage
H.264 1920 x1080 pixels @ 60 fps video format.
CAN ECU Connection
Feature a second CAN protocol that allows the user to set the ECU Stream of a wide number of supported ECUs.
Auto Start/Stop Recording
No need to think about the camera while you are ready at the starting line. SmartyCam 3 cameras starts recording when the master does or based on RPM or speed condition previously set.
Sapphire Glass
The strongest glass for facing all the high speed impacts with pebbles, insects, debris and dust that usually happen in a race.
Completely Waterproof
Designed to be used in the hardest environments: water, dust, working temperatures will be problems to forget.
Automatic Track Selection
SmartyCam 3 GP automatically selects the right track in its database, in order to easily draw it and calculate lap number, lap times and rolling times.
Compose your overlay layout
Choose your preferred layout to keep your data under control. Bars, gauges, maps, widgets and various elements available to find the perfect layout for your race session.
Wide Global Shutter CMOS sensor
The best way to avoid wave effects due to strong vibrations that can occur in Motorsport.
Much more than an action camera
Recording real-time overlay video with a low-distortion 67°, 84° 120° bullet lens and the CMOS Global Shutter sensor, SmartyCam 3 GP is designed to be the choice of those who want to take a step forward in data analysis in the world of Motorsport, not a simple camera, a Motorsport Video Data Logger Camera.
Much more than an action camera
Thanks to the CAN ECU connection, the Start&Stop and the automatic on/off, the 3G-SDI Output for streaming there will be no difficulty in configuring the system for your needs: once ready for your session on the track your AiM system will everything you need without worries.
The day on the track can be intense, hectic and above all very long. No problem in storing files on an SD card SC3 supports cards up to 2 TB (SD not included), you will have all the videos you want without having to give up any sessions.
AKM Motorpsort F4 open-wheel equipped with 84° bullet lens
Bullet cameras in motorsport are the best choice for single-seaters and cars with open cockpit, thanks to the video output, the connection for the external microphone, three lenses FOV angle available and the ECU connection SmartyCam 3 GP stands as the reference in the sector.
SMARTYCAM 3 GP GRAPHIC OVERLAYS
REAL-TIME CONFIGURABLE OVERLAYS
SmartyCam 3 cameras
have been designed for a single purpose:
PROVIDING GREAT VIDEOS
INCLUDING ALL INFORMATION YOU NEED FOR ANALYSIS
SmartyCam 3 Corsa overlays all the data from both GPS and AiM loggers connected to your ECU.
RACESTUDIO 3 - THE POWERFUL SOFTWARE
SmartyCam 3 Configuration
With RaceStudio 3 software you can configure your overlays as you wish: add your logo and the track map and choose your graphic elements from a list of pre-determined sets with same layout or even single objects from different sets. Your videos will be truly "yours" in all details, from the data to their graphic layout.
VIDEO AND DATA ANALYSIS WITH RS ANALYSIS 3
The key to improvement in Motorsport
Data Analysis in Motorsport is based on 3 pillars and they form a formidable framework for enhancing your personal or team’s performance.
MAXIMIZING DRIVER PERFORMANCE
MONITORING VEHICLE STATUS
OPTIMISING EFFICIENCY
Thanks to the SmartyCam 3 cameras, all these important aspects could be under your control.
The videos created by SC3 provide fantastic insights into telemetry and track lines in a professional motorsports setting.
Keeping track of your car’s health is the first pillar of data analysis and with a SmartyCam 3 and AiM loggers you can visualize and manage alerts and essential data such as oil pressure and battery voltage for identify potential issue early, saving valuable time and efforts when faults.
Monitoring sensors and other parameters can help eliminate possible setup dead ends, guiding you to make more targeted adjustments.
The video of a whole session, once downloaded on your PC, can now be split - with a simple click - in individual videos of each lap: so that you can simultaneously watch two of them and check where you were faster or slower. The same operation can be performed with a SmartyCam 3 video recorded on the same track: you will be able to compare your best lap with other sessions.
ADDITIONAL FEATURES
Video Output
SmartyCam 3 GP features a video output with SDI interface.
It allows to send the video/audio stream to a streamer at 30 or 60 fps to perform a video live streaming.
CAN connection
Connector labelled EXP is used to CAN connect the camera with AiM systems. In the CAN network SmartyCam 3 GP can be a master or a slave and can be connected to different AiM devices. The second CAN is dedicated to ECU connection with more than 2,000 protocols supported, constantly updated. This connection can also be configured to communicate with other devices through RaceStudio 3 software.
USB-C connection
USB-C port, placed in the side flap, makes any transfer from PC to SmartyCam 3 GP and viceversa easy and fast. Using the proper cable, USB-C port makes it possible to send configuration, updating, tracks and settings the camera framing in live view.
Full internal datalogger
All data received from the CAN bus and from the connected sensors are recorded in .mp4 files produced at the end of your test, your SD Card contains all the information you need for a deep data analysis. Whit the SD card you can also send the configuration, update and tracks to the camera.
SD card sold separately.
Designed for the extreme
An on-board camera designed for motorsport must guarantee great resistance against the extreme working conditions typical of racing and against the most adverse weather. That is why SmartyCam 3 cameras are IP65 waterproof made in machinery molded aluminum, PA fiberglass reinforced and features sapphire frontal glass for a complete protection.
Automatic Start & Stop
You have other things to think about while you are racing and your SmartyCam 3 cameras
is aware of that.
That is why it switches on/off automatically and starts/stops recording in the same way.
With SmartyCam 3 GP installed, the only thing you need to remember is to wipe off the bugs form the lens!
No "Jello Effect" with Global Shutter CMOS
Engine rumble causes vibrations, which are a big problem for video recording. You will never experience again that bothersome “jello effect” you get watching videos recorded by a camera with rolling shutter when the vehicle is running.
SmartyCam 3 cameras
have been designed for that environment and for those vibrations.
“Jello effect” will be just a distant memory.
High quality with small size video files
Generic HD cameras are focused on the highest pixels number. The result is that their video files are far too large, taking too much memory; for this reason SmartyCam 3 videos have the same quality as other FHD cameras but their files are smaller because the H.264 compression system parameters have been optimized to perfectly balance video quality and file size.
The Bullet Lens Field of View
Bullet cameras are the best option for open-wheels car, prototype and motorbike.
SmartyCam 3 GP comes with 67°-84°-120° angle lens.
The 67° FOV lens is usually adopted in closed cars, thus avoiding an excessive view of the cockpit in the video, while the 84° and 120° lenses are used in open-wheel cars offering a wide open view of the track.
Exclusively designed for professional use
The top level SmartyCam 3 GP Pro features 2 AS Micro Xtra Lite Deutsch connectors and an internal EMMC 64 GB storage in addition to the SD Card slot.
More powerful and faster than ever.
In the box:
SmartyCam 3 GP module with 67°, 84° or 120 bullet cam, 200 or 400 cm CAN Expansion/CAN ECU cable, 200 cm bullet cam cable, USB Type-C - Type-A cable, Battery charger with AC adapter.