Filter By
New products
New products
Products
Discover AiM products for motorsport: lap timers, loggers, visors, steering wheels, motorsport cameras and all products properly designed and developed for your car, bike or kart.
Subcategories
Active filters
-
![]()
GT32 Standalone
GT32 Standalone steering wheel transmits in a freely configurable CAN connection the status of 8 pushbuttons and 3 rotary switches plus more 2 pushbuttons in free contacts connections.
GT32 Standalone can be connected via CAN to every ECU and masters.
It features also 2 carbon fiber paddle shifters with a precise magnetic system.
The Steering wheel can be easily configured with RaceStudio 3 software via PC through USB 2.0 A-Type C-Type 200 cm cable included.
Icons set included:
-
![]()
GT32
GT32 steering wheel is a dedicated expansion for PDM32/PM08 and transmits in a freely configurable CAN connection the status of 8 pushbuttons and 3 rotary switches plus more 2 pushbuttons in free contacts connections.
It features also 2 carbon fiber optional paddle shifters with a precise magnetic system.
Icons set included:
-
![]()
K8 Open Keypad
K8 Open is the compact keypad that allows the transmission of commands to any external instrument connected via CAN-bus by means of a free and easily configurable protocol.
The configuration is easily done via USB using the AIM Race Studio 3 software.
The keypad is resistant to dust and water and each button is customizable thanks to a wide choice of easily insertable icons. -
![]()
ACC3
ACC3 is the compact Analog CAN Converter to expand your AiM system.
ACC3 Expansion manages 4 analog inputs to a max frequency of 200 Hz each and thanks to the dedicated split harness, the managed inputs are: thermocouples, thermoresistances, 0-5 V Signal, 0-12 V Signal, 2 digital speed inputs
-
![]()
ACC3 Open
ACC3 Open is the compact Analog CAN Converter by AiM
The device manages 4 analog inputs to a max frequency of 200 Hz each and thanks to the dedicated split harness, the managed inputs are: thermocouples, thermoresistances, 0-5 V Signal, 0-12 V Signal, 0-12 V Signal, 2 Digital speed inputs
ACC3 Open is freely configurable through "Open USB harness", using the AiM software RaceStudio 3.
NOTICE - "Open USB harness" sold separately. -
![]()
LCU1S Open
LCU1S Open is a stand-alone device that allows to perfectly tune the carburetion of your engine to keeping it at its best and improve the engine's performances. lt uses a wide band Bosch LSU 4.9 sensor that saves the original calibration for the duration of the sensor's life. In fact, Bosch LSU 4.9 probe has been designed to last for more than 100,000 km on a stock car.
-
![]()
LCU1S
LCU1S controller allows to perfectly tune the carburetion of your engine to keeping it at its best and improve the engine's performances. lt uses a wide band Bosch LSU 4.9 sensor that saves the original calibration for the duration of the sensor's life. In fact, Bosch LSU 4.9 probe has been designed to last for more than 100,000 km on a stock car.
-
![]()
- New
Strada Logger
Strada Logger is a small memory module that let you record and save all the data coming from the ECU.
In the box:
Strada Logger, RaceStudio 3 software freely downloadable from AiM web site.
SD card sold separately. -
![]()
MyChron Expansion
The channel multiplier for your MyChron.
Compatible with MyChron6/2T and MyChron5S/2T. -
![]()
GPS09c
Accessory for: SmartyCam 3 and other products. GPS09c with integrated antenna and CAN cable. You can choose between standard version and Pro version (6 axis IMU). Available in Roof version too.
-
![]()
GPS09c Open
GPS09c Open is a stand-alone device that can stream, in completely configurable messages, all the GPS data at 25 Hz via CAN or RS232.
The Pro Open version features also a 100 Hz 6 axis IMU.
Vehicle with carbon fiber roof or reduced glass surface may limit the GPS signal: the Roof version of AiM GPS09c Open is specifically designed to mount on roof of the vehicle. -
![]()
Taipan Y
Taipan Y is the brand-new aftermarket plug & play ECU created by AiM, exclusively designed for Yamaha offroad motorcycles. Thanks to their high technology 32-bit core, they represent an important step forward to improve the performances of your motorcycle, without sacrificing reliability and smoothness.
Purchase the UC-Bridge to keep it update, receive remote assistance, make map corrections and check faults indications
-
![]()
Taipan
Taipan is the brand-new aftermarket plug & play ECU created by AiM, exclusively designed for off-road motorcycles. Thanks to their high technology 32-bit core, they represent an important step forward to improve the performances of your motorcycle, without sacrificing reliability and smoothness.
-
![]()
Taipan K
Taipan K is the brand-new aftermarket plug & play ECU created by AiM, exclusively designed for 2 strokes off-road motorcycles. Thanks to their high technology 32-bit core, they represent an important step forward to improve the performances of your motorcycle, without sacrificing reliability and smoothness.
Available for 2 stokes engines KTM, Husqvarna and Gas Gas.
-
![]()
Taipan Y v2
Taipan Y v2 is the brand-new aftermarket plug & play ECU created by AiM, exclusively designed for Yamaha offroad motorcycles. Thanks to their high technology 32-bit core, they represent an important step forward to improve the performances of your motorcycle, without sacrificing reliability and smoothness.
Purchase the UC-Bridge to keep it update, receive remote assistance, make map corrections and check faults indications
-
![]()
Yarara
Yarara is the plug & play ECU developed by AiM for being installed on the Yamaha YFZ450R. Thanks to its high technology 32-bit core, it is a good help for improving the performances of your ATV, without sacrificing reliability and smoothness. Yarara is specifically designed for: Yamaha YFZ450R Model year 2021 and 2022.
Purchase the UC-Bridge to keep it update, receive remote assistance, make map corrections and check faults indications
