Accessories

Split harness designed to connect up to two expansion modules to your ECU Taipan system. Cable length: 50 cm.

Compatible with all the models of Taipan Series.
For Taipan Y v2, Taipan K and Taipan B the corresponding CAN + External Power Harness is required.

Split harness designed to connect up to two expansion modules to your ECU Taipan system.
Cable length: 30 cm.

Compatible with all the models  of Taipan series.
For Taipan Y v2, Taipan B and Taipan K, the corresponding CAN + External Power Harness is required.

The Split Harness is designed to interconnect the MyChron 6 with external peripheral devices and the ACC3/ACC3 Open modules, providing autonomous battery power supply and supporting the integration of numerous additional components (add-ons).

Available in two versions:

• for a single ACC3/ACC3 Open
• for multiple devices

CAN2 harness for MyChron6/6 2T.

7 pins metallic binder, available with lap connector, lenght 150cm.

7 pins metallic binder lap cable dedicated to MyChron6/6 2T, lenght 30 cm.  

The AiM sensors are sold with a 30 cm cable. Standard length extension cables are available from 50 cm to 400 cm.

Compatible with

• MXG/MXP/MXS
• MXG Strada/MXP Strada/MXS Strada
• MXm
• EVO5
• MXL Strada/Pista/Pro05

The AiM sensors are sold with a 30 cm cable. Standard length extension cables are available from 50 cm to 400 cm.

Compatible with

• EVO6L
• EVO4S
• EVO4
• Channel Expansion
• MyChron Expansion

Bosch LSU 4.9 probe has been designed to last for more than 100,000 km on a stock car.  

RPM cable compatible with MyChron5S/2T e MyChron6/2T.

Battery charger with AC adapter for: MyChron5S/2T, SmartyCam 3 Sport/Corsa/GP, Solo 2 and Solo 2 DL

USB/AC power adapter for: MyChron5S/2T, MyChron6/2T, ECULog and XLog 

Paddle with magnetic system and carbon fiber for the GT32 - GT32 Standalone and for SW4 270 (MY26) 270 and 280 steering wheel, guarantee high precision and effective feedback for shifting, allowing you to downshift and upshift with great confidence. The gear levers are equipped with free contacts on dedicated pins of the Autosport connector and/or CAN message communication.
For SW4 320 and 350 the paddle shifts are made in aluminium just like the clutch paddles available for SW4 models (not for MY26 version).

SW4 range handle grips. Plyhuretane and anodized aluminum.

Grip always at the top, race after race.

Standard rotary switche set for GT32-GT32 Standalone and SW4 steering wheel range with 3M® adhesive.

Allen key for fixing included.

Karting Steering Wheel specifically designed for MyChron in anodized aluminum, chamois leather.
Available in two colors (red/black or black) and 3/6 holes versions.

In the box:
Steering wheel, bracket.
Installation guide freely downloadable from AiM web site.

Accessory for: SmartyCam 3 and other products.

The acquisition of all essential data you need to evaluate your car performance needs the connection of many peripherals to your datalogger. This implies the presence of a great number of cables. To solve this problem, AiM developed Data Hub, the CAN connection multiplier that works as an interface between all AiM loggers and their peripheral equipments.

More Info

A complete set of interchangeable inserts icon for Keypad series and Open Keypad series.

The Memory Module is a small SD Card holder that can be connected via CAN bus to your AiM logger in order to record the data during your tests: the data will be saved simultaneously both in the logger and on the SD Card (not included).

Dedicated GPS with cable and bracket for MXK10 plug&play display dash logger for Kawasaki Ninja ZX-10 R.
Cable length 50 cm.

Infrared Optical Lap Receiver for MyChron6/2T.

The Infrared Optical Lap Receiver also known as IR Optical Lap Receiver, is mounted on your kart to detect lap signals from an infrared transmitter located at the side of the track.
For accurate signal detection, simply aim the receiver toward the transmitter's position.

It features a metallic binder connector and 90 cm or 140 cm cable to suit different mounting.

Accessory for: MyChron5S/2T

Accessory for: MyChron5S/2T

Infrared Optical Lap Receiver for MX 1.3 Strada Series.

The Infrared Optical Receiver also known as IR Optical Lap Receiver, is mounted on your vehicle to detect lap signals from an infrared transmitter located at the side of the track.
For accurate signal detection, simply aim the receiver toward the transmitter's position.

It is available with a 4-pin plastic binder connector.

Two cable lengths are offered to suit different vehicle types: a 90 cm lead for motorcycles, motocross bikes, or karts, and a 300 cm lead for cars.

Solo 2/Solo 2 DL installation kit for BMW motorcycles models.

Solo 2/Solo 2 DL bracket for Honda motorcycles models.

Solo 2 DL dedicated bracket for Suzuki sport bike motorcycles models.

Roll-bar kit for: Solo 2 and Solo 2 DL

U-Bolt kit for: Solo 2 and Solo 2 DL

Suction cup kit for: Solo 2 and Solo 2 DL

Solo 2 DL dedicated bracket for Yamaha sport bike motorcycles models.

Solo 2 DL dedicated bracket for Kawasaki motorcycles models.

Mounting bracket with screws for: Solo 2 and Solo 2 DL

Dedicated mounting bracket for Track-Day Kit, the perfect accessory for Solo 2 DL and SmartyCam 3 Corsa or Sport .

Solo Bar Pad Motocross for handle bars without cross brace for: Solo 2 and Solo 2 DL

More Info

Solo Bar Pad Motocross for handle bars with cross brace for: Solo 2 and Solo 2 DL

More Info

Display for EVO Series (EVO6, EVO6L, EVO4S and EVO5), resolution 268 x 128 pixels, 7 configurable RGB colors backlights, ambient light sensor, 5 configurable RGB LEDs shift lights, 4 configurable, RGB LEDs alarms, fully configurable pages, aluminum body, IP65.

In the box:
GS-Dash with coiled cable.

Battery charger kit for: MyChron5S/2T

Kit battery cover for: MyChron5S/2T

More Info

Roll-bar kit (bullet cams) for: SmartyCam 3 GP/Dual

U-bolt kit (bullet cams) for: and SmartyCam 4 GPD and SmartyCam 3 GP/Dual

Suction cup kit (Bullet cams) for: SmartyCam 3 GP/Dual and SmartyCam 4 GPD.

Roll-bar kit (record unit) for: SmartyCam 3 GP

U-bolt kit (record unit) for: and SmartyCam 4 GPD and SmartyCam 3 GP.

Suction cup kit (record unit) for: SmartyCam 3 GP

Kit for 1 to 2.1 inches Ø bar for: SmartyCam Series

Suction cup kit for: SmartyCam 4 Corsa and SmartyCam 3 Corsa, Sport.

Kit for 0.5 to 1.2 inches Ø bar for:SmartyCam 4 Corsa,  SmartyCam 3 Corsa and Sport.

Tire temperature bracket kit for kart installation.

USB cable for: MyChron5S/2T and MX Series.

Type C - Type A USB harness