Products

K15 Open keypad is the compact keypad that allows the transmission of commands to any external instrument connected via CAN-bus by means of a free and easily configurable protocol.
The configuration is easily done via USB using the AIM Race Studio 3 software.
The keypad is resistant to dust and water and each button is customizable thanks to a wide choice of easily insertable icons.

More Info

List of insert icons

K6 Open is the compact keypad that allows the transmission of commands to any external instrument connected via CAN-bus by means of a free and easily configurable protocol.
The configuration is easily done via USB using the AIM Race Studio 3 software.
The keypad is resistant to dust and water and each button is customizable thanks to a wide choice of easily insertable icons.

More Info

List of insert icons

K6 Open Keypad features:

Reconfigurable button’s | RGB LEDs programmable | LED Backlit rings and icons | CAN-Bus systems compatible | Momentary, toggle and multi-status | 3 blinking mode | Wide range of inserts and icons | Vertical or horizontal mount | Status restore option

In the box:

K6 Open Keypad in the chosen version, CAN harness from 200 to 400 cm

GT32 Standalone steering wheel transmits in a freely configurable CAN connection the status of 8 pushbuttons and 3 rotary switches plus more 2 pushbuttons in free contacts connections.

GT32 Standalone can be connected via CAN to every ECU and masters.

It features also 2 optional carbon fiber paddle shifters.

The Steering wheel can be easily configured with RaceStudio 3 software via PC through USB 2.0 A-Type C-Type 200 cm cable included.

More Info

Icons set included:

Pushbuttons Icons

GT32 steering wheel is a dedicated expansion for PDM32/PM08 and transmits in a freely configurable CAN connection the status of 8 pushbuttons and 3 rotary switches plus more 2 pushbuttons in free contacts connections.

It features also 2 carbon fiber optional paddle shifters.

More Info

Icons set included:

Pushbuttons Icons

AiM devices can measure cylinder head temperature using a sensor – thermocouple – located between the spark plug and the cylinder head. This thermocouple is available with

different diameters with a binder 3 pins connector with a 40 cm cable length.

More Info

AiM devices can measure exhaust gas temperature using a sensor – thermocouple – placed in the exhaust header pipe. All AiM thermocouples are K type sensor and fit car/bike/kart installations.

The version with T12 connector is CIK-FIA homologated dedicated to karting.

M5

T12

AiM devices can measure cylinder head temperature using a sensor – thermocouple – located between the spark plug and the cylinder head. This thermocouple is available with

different diameters and a mignon connector with a 40 cm cable length.

More Info

K8 Open is the compact keypad that allows the transmission of commands to any external instrument connected via CAN-bus by means of a free and easily configurable protocol.
The configuration is easily done via USB using the AIM Race Studio 3 software.
The keypad is resistant to dust and water and each button is customizable thanks to a wide choice of easily insertable icons.

More Info

List of insert icons

K8 Open features:

Reconfigurable button’s | RGB LEDs programmable | LED Backlit rings and icons | CAN-Bus systems compatible | Momentary, toggle and multi-status | 3 blinking mode | Wide range of inserts and icons | Vertical or horizontal mount | Status restore option

In the box:

K8 Open Keypad in the chosen version, CAN harness from 200 to 400 cm

The patch cable designed for MyChron6 allow the connections of different sensors.

It is available in two versions for using with thermocouples and thermoresistors.

Cable length is 150 cm, may vary depending on the connector.

More Info

The split patch cable designed for MyChron6 2T grant the use of two different sensor simultaneously.

It is available in three versions for using with thermocouples, thermoresistors or both.

Cable length is 150 cm, may vary depending on the connector.

More Info

ECLIPSE, the new line of AiM potentiometers is born; thanks to our experience in the motorsport world this new series of sensors perfectly fits the needs of the car-bike racing industry. Easy to install, our linear position sensors offer great performances in terms of accuracy, repeatability and life expectancy.

AiM pressure sensors dedicated to kart/MyChron application: 0-160 or 0-100 bar with M10 or 3/8 thread.

Sensors ending with Binder 719 (plastic) male connector for AiM devices to be conencted to a MyChorn Expansion.

AiM designed and developed new sensors that can sample and record two measurement at one time: pressure and temperature and are available with different threads, ending with a 4 pins Binder 719 (plastic) male connector or free wires.

AiM devices can sample and record data supplied by different pressure sensors. Multiple pressure sensors types are in fact available in our product range both ending with a Binder 719 (plastic) male connector or free wires.

AiM devices can measure the distance between two points using a kart brake/accelerator pedal magnetic position sensor. It gives an extremely precise indication of the pedal position, measures its travel and shows all values in percentage in a 0 e 100%. range.

MyChron Expansion is mandatory to use these sensors, soon will be replaced by ACC3.

AiM instruments can measure the relative displacement between two different points using a sensor (rotary potentiometer) directly connected to the two measure points. This sensor may be used to measure angular displacements, such as throttle position. 

AiM loggers can measure an element rotation (i.e. steering angle) using the rotatory potentiometer kit whose items are to be mounted integral with the mobile element and with a fixed reference point on the vehicle chassis.
The potentiometer is sold with a specific installation kit.

AiM loggers can measure an element rotation (i.e. steering angle) using the rotatory potentiometer kit whose items are to be mounted integral with the mobile element and with a fixed reference point on the vehicle chassis.
The potentiometer is sold with a specific installation kit.

AiM devices can measure the water temperature using a sensor – thermocouple – placed in the cooling system. All AiM thermocouples are K type sensor.

More Info

AiM car bike devices can measure and sample water and oil temperature using a sensor (thermoresistor) placed in the cooling system or in the oil cup.

PLEASE NOTE - Not suitable for Karting application. For Kart is available the following sensor:

Kart thermoresistor

More Info

AiM devices can measure and sample water temperature using a sensor (thermo resistor) placed in the cooling system.

More Info

ACC3 Open is the compact Analog CAN Converter by AiM

The device manages 4 analog inputs to a max frequency of 1 KHz each and thanks to the dedicated split harness, the managed inputs are: thermocouples, thermoresistances, 0-5 V Signal, 0-12 V Signal, 0-12 V Signal, 2 Digital speed inputs.

ACC3 Open is freely configurable through "Open USB harness", using the AiM software RaceStudio 3.
NOTICE - "Open USB harness" sold separately.

More Info

LCU1S Open is a stand-alone device that allows to perfectly tune the carburetion of your engine to keeping it at its best and improve the engine's performances. lt uses a wide band Bosch LSU 4.9 sensor that saves the original calibration for the duration of the sensor's life. In fact, Bosch LSU 4.9 probe has been designed to last for more than 100,000 km on a stock car.

GPS09c Open is a stand-alone device that can stream, in completely configurable messages, all the GPS data at 25 Hz via CAN or RS232.
The Pro Open version features also a 100 Hz 6 axis IMU.
Vehicle with carbon fiber roof or reduced glass surface may limit the GPS signal: the Roof version of AiM GPS09c Open is specifically designed to mount on roof of the vehicle.

More Info

Solo 2 DL and SmartyCam 3 Corsa or Sport: The perfect combinaton between data and videos.

The SmartyCam 3 CORSA camera has been designed for motorsport with a single purpose:

PROVIDING GREAT VIDEOS INCLUDING ALL INFORMATION YOU NEED.

SmartyCam 3 Corsa camera overlays all the data from both GPS and AiM loggers connected to your ECU.

More Info

IF ONE IS GREAT, DUAL IS BETTER

SmartyCam 3 Dual is the flagship version of SmartyCam 3 range, designed for any racer who wants to get the most out from any performance video on the track. Dual Full HD camera system, Video output, CAN connection, USB-C connection, Ethernet port are only few of the features of SmartyCam 3 Dual: the most powerful of our range.

More Info

The SmartyCam 3 GP camera has been designed for motorsport with a single purpose:

PROVIDING GREAT VIDEOS INCLUDING ALL INFORMATION YOU NEED.

SmartyCam 3 GP camera overlays all the data from both GPS and AiM loggers connected to your ECU.

More Info

The compact SmartyCam 3 Sport camera has been designed for motorsport with a single purpose: providing great videos including all information you need.
SmartyCam 3 Sport camera overlays all the data from both GPS and AiM loggers connected to your ECU.

Kit SmartyCam 3 Sport configuration:

• 84° Camera Lens
• 200 cm CAN Cable
• Data Hub 2-ways

More Info

The compact SmartyCam 3 Sport camera has been designed for motorsport with a single purpose: providing great videos including all information you need.
SmartyCam 3 Sport camera overlays all the data from both GPS and AiM loggers connected to your ECU.

More Info