Products

GT32 steering wheel is a dedicated expansion for PDM32/PM08 and transmits in a freely configurable CAN connection the status of 8 pushbuttons and 3 rotary switches plus more 2 pushbuttons in free contacts connections.

It features also 2 carbon fiber optional paddle shifters with a precise magnetic system.

More Info

Icons set included:

Pushbuttons Icons

ECULog is a data logger to record data from your ECU.

Rugged, waterproof with 4 GB internal memory, coming along with a 16 GB removable key and with its only 61 x 44 x 27 mm is the smallest data logger in AiM range.

More Info

K8 keypad is a compact keypad dedicated to AiM PDM32/PDM08 working through the AiM Expansion CAN Bus. The keypad is water and dust resistant, and can be installed both inside and outside the cockpit.

More Info

K8 Open is the compact keypad that allows the transmission of commands to any external instrument connected via CAN-bus by means of a free and easily configurable protocol.
The configuration is easily done via USB using the AIM Race Studio 3 software.
The keypad is resistant to dust and water and each button is customizable thanks to a wide choice of easily insertable icons.

More Info

ACC3 is the compact Analog CAN Converter to expand your AiM system.

ACC3 Expansion manages 4 analog inputs to a max frequency of 200 Hz each and thanks to the dedicated split harness, the managed inputs are: thermocouples, thermoresistances, 0-5 V Signal, 0-12 V Signal, 2 digital speed inputs

More Info

LCU1S controller allows to perfectly tune the carburetion of your engine to keeping it at its best and improve the engine's performances. lt uses a wide band Bosch LSU 4.9 sensor that saves the original calibration for the duration of the sensor's life. In fact, Bosch LSU 4.9 probe has been designed to last for more than 100,000 km on a stock car.

Strada Logger is a small memory module that let you record and save all the data coming from the ECU.

In the box:

Strada Logger, RaceStudio 3 software freely downloadable from AiM web site.
SD card sold separately.

The channel multiplier for your MyChron.
Compatible with MyChron6/2T and MyChron5S/2T.

XLog is a complete and compact data logger for recording data from your ECU with integrated GPS and battery. Robust, waterproof with 4GB of internal memory, with the small removable 16GB USB drive, it's the most complete and compact data logger in the AiM range.

More Info

Accessory for: SmartyCam 3 and other products. GPS09c with integrated antenna and CAN cable. You can choose between standard version and Pro version (6 axis IMU). Available in Roof version too.

Solo 2 GPS Laptimer features a four constellations GPS at 25 Hz receiver and a 100 Hz 6-axis inertial platform. It calculates, shows and records: lap times, sector times, position and vehicle speed, 3D acceleration and gyro.

More Info

In the box:

Solo 2, power cable with car lighter socket, power cable with AC adapter, mounting bracket with screws, user manual & RaceStudio 3 software freely downloadable from AiM web site, AiM sticker.

Solo 2 DL in addition to what Solo 2 offers, provides some extremely useful features:

ECU connection for receiving, showing and recording all the data directly from your ECU, both for CAN, RS232 and K-line connections, low voltage 150-400 V of the coil or from a digital square wave signal (8-50 V) and CAN expansions

More Info

In the box:

Solo 2 DL, connecting cable in the chosen version, power cable with AC adapter, mounting bracket with screws, user manual & RaceStudio 3 software freely downloadable from AiM web site, AiM sticker.

Solo 2 DL and SmartyCam 3 Corsa or Sport: The perfect combinaton between data and videos.