Products

GT32 Standalone steering wheel transmits in a freely configurable CAN connection the status of 8 pushbuttons and 3 rotary switches plus more 2 pushbuttons in free contacts connections.

GT32 Standalone can be connected via CAN to every ECU and masters.

It features also 2 carbon fiber paddle shifters with a precise magnetic system.

The Steering wheel can be easily configured with RaceStudio 3 software via PC through USB 2.0 A-Type C-Type 200 cm cable included.

More Info

Icons set included:

Pushbuttons Icons

GT32 steering wheel is a dedicated expansion for PDM32/PM08 and transmits in a freely configurable CAN connection the status of 8 pushbuttons and 3 rotary switches plus more 2 pushbuttons in free contacts connections.

It features also 2 carbon fiber optional paddle shifters with a precise magnetic system.

More Info

Icons set included:

Pushbuttons Icons

K8 keypad is a compact keypad dedicated to AiM PDM32/PDM08 working through the AiM Expansion CAN Bus. The keypad is water and dust resistant, and can be installed both inside and outside the cockpit.

More Info

K8 Open is the compact keypad that allows the transmission of commands to any external instrument connected via CAN-bus by means of a free and easily configurable protocol.
The configuration is easily done via USB using the AIM Race Studio 3 software.
The keypad is resistant to dust and water and each button is customizable thanks to a wide choice of easily insertable icons.

More Info

ACC3 is the compact Analog CAN Converter to expand your AiM system.

ACC3 Expansion manages 4 analog inputs to a max frequency of 200 Hz each and thanks to the dedicated split harness, the managed inputs are: thermocouples, thermoresistances, 0-5 V Signal, 0-12 V Signal, 2 digital speed inputs

More Info

ACC3 Open is the compact Analog CAN Converter by AiM

The device manages 4 analog inputs to a max frequency of 200 Hz each and thanks to the dedicated split harness, the managed inputs are: thermocouples, thermoresistances, 0-5 V Signal, 0-12 V Signal, 0-12 V Signal, 2 Digital speed inputs

ACC3 Open is freely configurable through "Open USB harness", using the AiM software RaceStudio 3.
NOTICE - "Open USB harness" sold separately.

More Info

LCU1S Open is a stand-alone device that allows to perfectly tune the carburetion of your engine to keeping it at its best and improve the engine's performances. lt uses a wide band Bosch LSU 4.9 sensor that saves the original calibration for the duration of the sensor's life. In fact, Bosch LSU 4.9 probe has been designed to last for more than 100,000 km on a stock car.

LCU1S controller allows to perfectly tune the carburetion of your engine to keeping it at its best and improve the engine's performances. lt uses a wide band Bosch LSU 4.9 sensor that saves the original calibration for the duration of the sensor's life. In fact, Bosch LSU 4.9 probe has been designed to last for more than 100,000 km on a stock car.

Strada Logger is a small memory module that let you record and save all the data coming from the ECU.

In the box:

Strada Logger, RaceStudio 3 software freely downloadable from AiM web site.
SD card sold separately.

The channel multiplier for your MyChron.
Compatible with MyChron6/2T and MyChron5S/2T.

The tire temperature sensors measure the surface temperature of tires: with a 35° field of view, they  sample temperatures between -20 and 120°C and provide a 0-5V output signal. The four sensors come in a kit including an IR temperature controller device, which is necessary for connection to MyChron.

In the box:

IR temperature controller, four tire temperature sensors, power cable, two 4 pin 712+719 patch cables 100 cm length, two 4 pin 712+719 patch cables 200 cm length. User manual freely downloadable from AiM web site.

Accessory for: SmartyCam 3 and other products. GPS09c with integrated antenna and CAN cable. You can choose between standard version and Pro version (6 axis IMU). Available in Roof version too.

GPS09c Open is a stand-alone device that can stream, in completely configurable messages, all the GPS data at 25 Hz via CAN or RS232.
The Pro Open version features also a 100 Hz 6 axis IMU.
Vehicle with carbon fiber roof or reduced glass surface may limit the GPS signal: the Roof version of AiM GPS09c Open is specifically designed to mount on roof of the vehicle.

More Info

MyChron 6 is the new arrival in the prestigious MyChron range: The reference for laptimers dedicated to the world of karting.
MyChron 6 brings with it many new features.
It samples lap times and split times, speed, RPM, temperature, track position, accelerations and much more even more accurately, guaranteeing you an even more precise predictive time and reference lap delta.

More Info

In the box:

MyChron6, USB 2.0 A-Type C-Type 100 cm cable, RPM cable, 1 temperature sensor in the chosen version + extension cable where expected. User manual & Race Studio 3 software freely downloadable from AiM web site.

The ultimate lap timer for serious kart racers.
The MyChron6 2T is the benchmark for lap timers dedicated to the karting world. Designed for the most demanding karting teams and drivers, the MyChron6 2T manages two temperature values acquired from exhaust gas, cylinder head or water temperature sensors.

PLEASE NOTE: The device is sold with 1 temperature sensor and the patch cable for connecting a second sensor, which can be purchased separately.

ADD-ONS

In the box:

MyChron6 2T, 100 cm USB 2.0 A-Type C-Type cable, RPM cable, 1 temperature sensor with split extension for the second sensor (second sensor sold separately), Race Studio 3 software downloadable for free from the AiM website

Solo 2 DL and SmartyCam 3 Corsa or Sport: The perfect combinaton between data and videos.

The SmartyCam 3 CORSA camera has been designed for motorsport with a single purpose:

PROVIDING GREAT VIDEOS INCLUDING ALL INFORMATION YOU NEED.

SmartyCam 3 Corsa camera overlays all the data from both GPS and AiM loggers connected to your ECU.

More Info

IF ONE IS GREAT, DUAL IS BETTER

SmartyCam 3 Dual is the flagship version of SmartyCam 3 range, designed for any racer who wants to get the most out from any performance video on the track. Dual Full HD camera system, Video output, CAN connection, USB-C connection, Ethernet port are only few of the features of SmartyCam 3 Dual: the most powerful of our range.

More Info

The SmartyCam 3 GP camera has been designed for motorsport with a single purpose:

PROVIDING GREAT VIDEOS INCLUDING ALL INFORMATION YOU NEED.

SmartyCam 3 GP camera overlays all the data from both GPS and AiM loggers connected to your ECU.

More Info

The compact SmartyCam 3 Sport camera has been designed for motorsport with a single purpose: providing great videos including all information you need.
SmartyCam 3 Sport camera overlays all the data from both GPS and AiM loggers connected to your ECU.

Kit SmartyCam 3 Sport configuration:

• 84° Camera Lens
• 200 cm CAN Cable
• Data Hub 2-ways

More Info

The compact SmartyCam 3 Sport camera has been designed for motorsport with a single purpose: providing great videos including all information you need.
SmartyCam 3 Sport camera overlays all the data from both GPS and AiM loggers connected to your ECU.

More Info