Products

GT32 Standalone steering wheel transmits in a freely configurable CAN connection the status of 8 pushbuttons and 3 rotary switches plus more 2 pushbuttons in free contacts connections.

GT32 Standalone can be connected via CAN to every ECU and masters.

It features also 2 carbon fiber paddle shifters with a precise magnetic system.

The Steering wheel can be easily configured with RaceStudio 3 software via PC through USB 2.0 A-Type C-Type 200 cm cable included.

More Info

Icons set included:

Pushbuttons Icons

GT32 steering wheel is a dedicated expansion for PDM32/PM08 and transmits in a freely configurable CAN connection the status of 8 pushbuttons and 3 rotary switches plus more 2 pushbuttons in free contacts connections.

It features also 2 carbon fiber optional paddle shifters with a precise magnetic system.

More Info

Icons set included:

Pushbuttons Icons

AiM devices can measure cylinder head temperature using a sensor – thermocouple – located between the spark plug and the cylinder head. This thermocouple is available with

different diameters with a binder 3 pins connector with a 40 cm cable length.

More Info

AiM devices can measure exhaust gas temperature using a sensor – thermocouple – placed in the exhaust header pipe. All AiM thermocouples are K type sensor and fit car/bike/kart installations.

The version with T12 connector is CIK-FIA homologated dedicated to karting.

M5

T12

AiM devices can measure cylinder head temperature using a sensor – thermocouple – located between the spark plug and the cylinder head. This thermocouple is available with

different diameters and a mignon connector with a 40 cm cable length.

More Info

K8 keypad is a compact keypad dedicated to AiM PDM32/PDM08 working through the AiM Expansion CAN Bus. The keypad is water and dust resistant, and can be installed both inside and outside the cockpit.

More Info

K8 Open is the compact keypad that allows the transmission of commands to any external instrument connected via CAN-bus by means of a free and easily configurable protocol.
The configuration is easily done via USB using the AIM Race Studio 3 software.
The keypad is resistant to dust and water and each button is customizable thanks to a wide choice of easily insertable icons.

More Info

The patch cable designed for MyChron6 allow the connections of different sensors.

It is available in two versions for using with thermocouples and thermoresistors.

Cable length is 150 cm, may vary depending on the connector.

More Info

The split patch cable designed for MyChron6 2T grant the use of two different sensor simultaneously.

It is available in three versions for using with thermocouples, thermoresistors or both.

Cable length is 150 cm, may vary depending on the connector.

More Info

AiM pressure sensors dedicated to kart/MyChron application: 0-160 or 0-100 bar with M10 or 3/8 thread.

Sensors ending with Binder 719 (plastic) male connector for AiM devices to be conencted to a MyChorn Expansion.

AiM designed and developed new sensors that can sample and record two measurement at one time: pressure and temperature and are available with different threads, ending with a 4 pins Binder 719 (plastic) male connector or free wires.

AiM devices can sample and record data supplied by different pressure sensors. Multiple pressure sensors types are in fact available in our product range both ending with a Binder 719 (plastic) male connector or free wires.

AiM devices can measure the distance between two points using a kart brake/accelerator pedal magnetic position sensor. It gives an extremely precise indication of the pedal position, measures its travel and shows all values in percentage in a 0 e 100%. range.

Compatible with MyChron Expansion.

AiM instruments can measure the relative displacement between two different points using a sensor (rotary potentiometer) directly connected to the two measure points. This sensor may be used to measure angular displacements, such as throttle position. 

AiM loggers can measure an element rotation (i.e. steering angle) using the rotatory potentiometer kit whose items are to be mounted integral with the mobile element and with a fixed reference point on the vehicle chassis.
The potentiometer is sold with a specific installation kit.

AiM loggers can measure an element rotation (i.e. steering angle) using the rotatory potentiometer kit whose items are to be mounted integral with the mobile element and with a fixed reference point on the vehicle chassis.
The potentiometer is sold with a specific installation kit.

AiM devices can measure the water temperature using a sensor – thermocouple – placed in the cooling system. All AiM thermocouples are K type sensor.

More Info

AiM car bike devices can measure and sample water and oil temperature using a sensor (thermoresistor) placed in the cooling system or in the oil cup.

PLEASE NOTE - Not suitable for Karting application. For Kart is available the following sensor:

Kart thermoresistor

More Info

AiM devices can measure and sample water temperature using a sensor (thermo resistor) placed in the cooling system.

More Info

ACC3 is the compact Analog CAN Converter to expand your AiM system.

ACC3 Expansion manages 4 analog inputs to a max frequency of 200 Hz each and thanks to the dedicated split harness, the managed inputs are: thermocouples, thermoresistances, 0-5 V Signal, 0-12 V Signal, 2 digital speed inputs

More Info

ACC3 Open is the compact Analog CAN Converter by AiM

The device manages 4 analog inputs to a max frequency of 200 Hz each and thanks to the dedicated split harness, the managed inputs are: thermocouples, thermoresistances, 0-5 V Signal, 0-12 V Signal, 0-12 V Signal, 2 Digital speed inputs

ACC3 Open is freely configurable through "Open USB harness", using the AiM software RaceStudio 3.
NOTICE - "Open USB harness" sold separately.

More Info

LCU1S Open is a stand-alone device that allows to perfectly tune the carburetion of your engine to keeping it at its best and improve the engine's performances. lt uses a wide band Bosch LSU 4.9 sensor that saves the original calibration for the duration of the sensor's life. In fact, Bosch LSU 4.9 probe has been designed to last for more than 100,000 km on a stock car.

LCU1S controller allows to perfectly tune the carburetion of your engine to keeping it at its best and improve the engine's performances. lt uses a wide band Bosch LSU 4.9 sensor that saves the original calibration for the duration of the sensor's life. In fact, Bosch LSU 4.9 probe has been designed to last for more than 100,000 km on a stock car.

Strada Logger is a small memory module that let you record and save all the data coming from the ECU.

In the box:

Strada Logger, RaceStudio 3 software freely downloadable from AiM web site.
SD card sold separately.

The channel multiplier for your MyChron.
Compatible with MyChron6/2T and MyChron5S/2T.

The tire temperature sensors measure the surface temperature of tires: with a 35° field of view, they  sample temperatures between -20 and 120°C and provide a 0-5V output signal. The four sensors come in a kit including an IR temperature controller device, which is necessary for connection to MyChron.

In the box:

IR temperature controller, four tire temperature sensors, power cable, two 4 pin 712+719 patch cables 100 cm length, two 4 pin 712+719 patch cables 200 cm length. User manual freely downloadable from AiM web site.

Accessory for: SmartyCam 3 and other products. GPS09c with integrated antenna and CAN cable. You can choose between standard version and Pro version (6 axis IMU). Available in Roof version too.

GPS09c Open is a stand-alone device that can stream, in completely configurable messages, all the GPS data at 25 Hz via CAN or RS232.
The Pro Open version features also a 100 Hz 6 axis IMU.
Vehicle with carbon fiber roof or reduced glass surface may limit the GPS signal: the Roof version of AiM GPS09c Open is specifically designed to mount on roof of the vehicle.

More Info