Products

K15 keypad is a compact keypad dedicated to AiM PDM32/PDM08 working through the AiM Expansion CAN Bus. The keypad is water and dust resistant, and can be installed both inside and outside the cockpit.

More Info

List of insert icons

K15 Open keypad is the compact keypad that allows the transmission of commands to any external instrument connected via CAN-bus by means of a free and easily configurable protocol.
The configuration is easily done via USB using the AIM Race Studio 3 software.
The keypad is resistant to dust and water and each button is customizable thanks to a wide choice of easily insertable icons.

More Info

List of insert icons

K6 Open is the compact keypad that allows the transmission of commands to any external instrument connected via CAN-bus by means of a free and easily configurable protocol.
The configuration is easily done via USB using the AIM Race Studio 3 software.
The keypad is resistant to dust and water and each button is customizable thanks to a wide choice of easily insertable icons.

More Info

List of insert icons

K6 Open Keypad features:

Reconfigurable button’s | RGB LEDs programmable | LED Backlit rings and icons | CAN-Bus systems compatible | Momentary, toggle and multi-status | 3 blinking mode | Wide range of inserts and icons | Vertical or horizontal mount | Status restore option

In the box:

K6 Open Keypad in the chosen version, CAN harness from 200 to 400 cm

K6 keypad is a compact keypad dedicated to AiM PDM32/PDM08 working through the AiM Expansion CAN Bus. The keypad is water and dust resistant, and can be installed both inside and outside the cockpit.

More Info

List of insert icons

GT32 Standalone steering wheel transmits in a freely configurable CAN connection the status of 8 pushbuttons and 3 rotary switches plus more 2 pushbuttons in free contacts connections.

GT32 Standalone can be connected via CAN to every ECU and masters.

It features also 2 optional carbon fiber paddle shifters.

The Steering wheel can be easily configured with RaceStudio 3 software via PC through USB 2.0 A-Type C-Type 200 cm cable included.

More Info

Icons set included:

Pushbuttons Icons

GT32 steering wheel is a dedicated expansion for PDM32/PM08 and transmits in a freely configurable CAN connection the status of 8 pushbuttons and 3 rotary switches plus more 2 pushbuttons in free contacts connections.

It features also 2 carbon fiber optional paddle shifters.

More Info

Icons set included:

Pushbuttons Icons

K8 keypad is a compact keypad dedicated to AiM PDM32/PDM08 working through the AiM Expansion CAN Bus. The keypad is water and dust resistant, and can be installed both inside and outside the cockpit.

In the box: K8 Keypad and CAN Expansion harness from 200 to 400 cm

More Info

List of insert icons

K8 Open is the compact keypad that allows the transmission of commands to any external instrument connected via CAN-bus by means of a free and easily configurable protocol.
The configuration is easily done via USB using the AIM Race Studio 3 software.
The keypad is resistant to dust and water and each button is customizable thanks to a wide choice of easily insertable icons.

More Info

List of insert icons

K8 Open features:

Reconfigurable button’s | RGB LEDs programmable | LED Backlit rings and icons | CAN-Bus systems compatible | Momentary, toggle and multi-status | 3 blinking mode | Wide range of inserts and icons | Vertical or horizontal mount | Status restore option

In the box:

K8 Open Keypad in the chosen version, CAN harness from 200 to 400 cm

ACC3 is the compact Analog CAN Converter to expand your AiM system.

ACC3 Expansion manages 4 analog inputs to a max frequency of 1 KHz each and thanks to the dedicated split harness, the managed inputs are: thermocouples, thermoresistances, 0-5 V Signal, 0-12 V Signal, 2 digital speed inputs

More Info

ACC3 Open is the compact Analog CAN Converter by AiM

The device manages 4 analog inputs to a max frequency of 1 KHz each and thanks to the dedicated split harness, the managed inputs are: thermocouples, thermoresistances, 0-5 V Signal, 0-12 V Signal, 0-12 V Signal, 2 Digital speed inputs.

ACC3 Open is freely configurable through "Open USB harness", using the AiM software RaceStudio 3.
NOTICE - "Open USB harness" sold separately.

More Info

CAN – BT Module grants instant access to key engine data from your Taipan and Yarara ECU.

Installing the SPARK App on your smartphone provides a streamlined, data-driven interface for real-time monitoring of live engine parameters.

Get real-time insights into:

📈 Live Dash Telemetry
⚠️ Warning and Alerts for Diagnostic Faults
🔄 Map Switching
⚙️ Fuel Adjustments

Thanks to automatic pairing, you just need to connect your smatphone once in either case!

Download the SPARK App for Apple iOS and Android.

LCU1S Open is a stand-alone device that allows to perfectly tune the carburetion of your engine to keeping it at its best and improve the engine's performances. lt uses a wide band Bosch LSU 4.9 sensor that saves the original calibration for the duration of the sensor's life. In fact, Bosch LSU 4.9 probe has been designed to last for more than 100,000 km on a stock car.

LCU1S controller allows to perfectly tune the carburetion of your engine to keeping it at its best and improve the engine's performances. lt uses a wide band Bosch LSU 4.9 sensor that saves the original calibration for the duration of the sensor's life. In fact, Bosch LSU 4.9 probe has been designed to last for more than 100,000 km on a stock car.

Strada Logger is a small memory module that let you record and save all the data coming from the ECU.

In the box:

Strada Logger, RaceStudio 3 software freely downloadable from AiM web site.
SD card sold separately.

The channel multiplier for your MyChron.
Compatible with MyChron6/2T and MyChron5S/2T.

Accessory for: SmartyCam 3 and other products. GPS09c with integrated antenna and CAN cable. You can choose between standard version and Pro version (6 axis IMU). Available in Roof version too.

GPS09c Open is a stand-alone device that can stream, in completely configurable messages, all the GPS data at 25 Hz via CAN or RS232.
The Pro Open version features also a 100 Hz 6 axis IMU.
Vehicle with carbon fiber roof or reduced glass surface may limit the GPS signal: the Roof version of AiM GPS09c Open is specifically designed to mount on roof of the vehicle.

More Info

Solo 2 GPS Laptimer features a four constellations GPS at 25 Hz receiver and a 100 Hz 6-axis inertial platform. It calculates, shows and records: lap times, sector times, position and vehicle speed, 3D acceleration and gyro.

More Info

In the box:

Solo 2, power cable with car lighter socket, power cable with AC adapter, mounting bracket with screws, user manual & RaceStudio 3 software freely downloadable from AiM web site, AiM sticker.

Solo 2 DL in addition to what Solo 2 offers, provides some extremely useful features:

ECU connection for receiving, showing and recording all the data directly from your ECU, both for CAN, RS232 and K-line connections, low voltage 150-400 V of the coil or from a digital square wave signal (8-50 V) and CAN expansions

More Info

In the box:

Solo 2 DL, connecting cable in the chosen version, power cable with AC adapter, mounting bracket with screws, user manual & RaceStudio 3 software freely downloadable from AiM web site, AiM sticker.

HBS2 — the compact, high-performance, and built tough Handle Bar Switch.

Highlights:

✅ Map Management
✅ Fuel Trim
✅ Traction Control Management
✅ Buttons Setting Memorization
✅ Quick shifting management on factory-equipped bikes

Solo 2 DL and SmartyCam 3 Corsa or Sport: The perfect combinaton between data and videos.