Filter By
New products
New products
Products
Discover AiM products for motorsport: lap timers, loggers, visors, steering wheels, motorsport cameras and all products properly designed and developed for your car, bike or kart.
Subcategories
Active filters
-
![]()
GT32
GT32 steering wheel is a dedicated expansion for PDM32/PM08 and transmits in a freely configurable CAN connection the status of 8 pushbuttons and 3 rotary switches plus more 2 pushbuttons in free contacts connections.
It features also 2 carbon fiber optional paddle shifters with a precise magnetic system.
Icons set included:
-
![]()
ACC3
ACC3 is the compact Analog CAN Converter to expand your AiM system.
ACC3 Expansion manages 4 analog inputs to a max frequency of 200 Hz each and thanks to the dedicated split harness, the managed inputs are: thermocouples, thermoresistances, 0-5 V Signal, 0-12 V Signal, 2 digital speed inputs
-
![]()
LCU1S
LCU1S controller allows to perfectly tune the carburetion of your engine to keeping it at its best and improve the engine's performances. lt uses a wide band Bosch LSU 4.9 sensor that saves the original calibration for the duration of the sensor's life. In fact, Bosch LSU 4.9 probe has been designed to last for more than 100,000 km on a stock car.
-
![]()
- New
Strada Logger
Strada Logger is a small memory module that let you record and save all the data coming from the ECU.
In the box:
Strada Logger, RaceStudio 3 software freely downloadable from AiM web site.
SD card sold separately. -
![]()
MyChron Expansion
The channel multiplier for your MyChron.
Compatible with MyChron6/2T and MyChron5S/2T. -
![]()
GPS09c
Accessory for: SmartyCam 3 and other products. GPS09c with integrated antenna and CAN cable. You can choose between standard version and Pro version (6 axis IMU). Available in Roof version too.
-
![]()
Solo 2
Solo 2 GPS Laptimer features a four constellations GPS at 25 Hz receiver and a 100 Hz 6-axis inertial platform. It calculates, shows and records: lap times, sector times, position and vehicle speed, 3D acceleration and gyro.
In the box:
Solo 2, power cable with car lighter socket, power cable with AC adapter, mounting bracket with screws, user manual & RaceStudio 3 software freely downloadable from AiM web site, AiM sticker.
-
![]()
Solo 2 DL
Solo 2 DL in addition to what Solo 2 offers, provides some extremely useful features:
ECU connection for receiving, showing and recording all the data directly from your ECU, both for CAN, RS232 and K-line connections, low voltage 150-400 V of the coil or from a digital square wave signal (8-50 V) and CAN expansions
In the box:
Solo 2 DL, connecting cable in the chosen version, power cable with AC adapter, mounting bracket with screws, user manual & RaceStudio 3 software freely downloadable from AiM web site, AiM sticker.
-
![]()
Taipan Y
Taipan Y is the brand-new aftermarket plug & play ECU created by AiM, exclusively designed for Yamaha offroad motorcycles. Thanks to their high technology 32-bit core, they represent an important step forward to improve the performances of your motorcycle, without sacrificing reliability and smoothness.
Purchase the UC-Bridge to keep it update, receive remote assistance, make map corrections and check faults indications
-
![]()
Taipan
Taipan is the brand-new aftermarket plug & play ECU created by AiM, exclusively designed for off-road motorcycles. Thanks to their high technology 32-bit core, they represent an important step forward to improve the performances of your motorcycle, without sacrificing reliability and smoothness.
-
![]()
Taipan K
Taipan K is the brand-new aftermarket plug & play ECU created by AiM, exclusively designed for 2 strokes off-road motorcycles. Thanks to their high technology 32-bit core, they represent an important step forward to improve the performances of your motorcycle, without sacrificing reliability and smoothness.
Available for 2 stokes engines KTM, Husqvarna and Gas Gas.
-
![]()
Taipan Y v2
Taipan Y v2 is the brand-new aftermarket plug & play ECU created by AiM, exclusively designed for Yamaha offroad motorcycles. Thanks to their high technology 32-bit core, they represent an important step forward to improve the performances of your motorcycle, without sacrificing reliability and smoothness.
Purchase the UC-Bridge to keep it update, receive remote assistance, make map corrections and check faults indications
-
![]()
Yarara
Yarara is the plug & play ECU developed by AiM for being installed on the Yamaha YFZ450R. Thanks to its high technology 32-bit core, it is a good help for improving the performances of your ATV, without sacrificing reliability and smoothness. Yarara is specifically designed for: Yamaha YFZ450R Model year 2021 and 2022.
Purchase the UC-Bridge to keep it update, receive remote assistance, make map corrections and check faults indications
-
![]()
Track-Day Kit
Solo 2 DL and SmartyCam 3 Corsa or Sport: The perfect combinaton between data and videos.
-
![]()
SmartyCam 3 Corsa
The SmartyCam 3 CORSA camera has been designed for motorsport with a single purpose:
PROVIDING GREAT VIDEOS INCLUDING ALL INFORMATION YOU NEED.
SmartyCam 3 Corsa camera overlays all the data from both GPS and AiM loggers connected to your ECU.
-
![]()
SmartyCam 3 Dual
IF ONE IS GREAT, DUAL IS BETTER
SmartyCam 3 Dual is the flagship version of SmartyCam 3 range, designed for any racer who wants to get the most out from any performance video on the track. Dual Full HD camera system, Video output, CAN connection, USB-C connection, Ethernet port are only few of the features of SmartyCam 3 Dual: the most powerful of our range.
-
![]()
SmartyCam 3 GP
The SmartyCam 3 GP camera has been designed for motorsport with a single purpose:
PROVIDING GREAT VIDEOS INCLUDING ALL INFORMATION YOU NEED.
SmartyCam 3 GP camera overlays all the data from both GPS and AiM loggers connected to your ECU.
-
![]()
Kit SmartyCam 3 Sport for MyChron
The compact SmartyCam 3 Sport camera has been designed for motorsport with a single purpose: providing great videos including all information you need.
SmartyCam 3 Sport camera overlays all the data from both GPS and AiM loggers connected to your ECU.Kit SmartyCam 3 Sport configuration:
- 84° Camera Lens
- 200 cm CAN Cable
- Data Hub 2-ways
-
![]()
SmartyCam 3 Sport
The compact SmartyCam 3 Sport camera has been designed for motorsport with a single purpose: providing great videos including all information you need.
SmartyCam 3 Sport camera overlays all the data from both GPS and AiM loggers connected to your ECU.
